DICA LiftGuard LG-12-3-90 Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DICA LiftGuard LG-12-3-90. DICA LiftGuard LG-12-3-90 2 pages.

Imprimer la page
When using
Rigging Practices - Grooved Sling Protectors
•
The plate edge
MUST
groove with no more than 1/16" slack between the groove and the plate's top and bottom edges.
•
DO NOT USE
for turning or rolling operations.
•
Grooved LiftGuard Sling Protector working loads limits are designated in the chart.
Groove Width/Plate Thickness
.25" Groove width .25" Plate
.5" Groove width .5" Plate
.75" Groove width .75" Plate
1" Groove width 1" Plate
1.5" Groove width 1.5" Plate
1.75" Groove width 1.75" Plate 21,875 lbs. per inch of synthetic sling width.
2" Groove width 2" Plate
2.25" Groove width 2.25" Plate 28,125 lbs. per inch of synthetic sling width.
2.5" Groove width 2.5" Plate
2.75" Groove width 2.75" Plate 34,375 lbs. per inch of synthetic sling width.
3" Groove width 3" Plate
Updated: 06/1/20
by
WARNING
GROOVED
LiftGuard Sling Protectors, please note the following:
contact the back of the groove and the plate top and bottom
3,125 lbs. per inch of synthetic sling width.
6,250 lbs. per inch of synthetic sling width.
9,375 lbs. per inch of synthetic sling width.
12,500 lbs. per inch of synthetic sling width.
18,750 lbs. per inch of synthetic sling width.
25,000 lbs. per inch of synthetic sling width.
31,250 lbs. per inch of synthetic sling width.
37,500 lbs. per inch of synthetic sling width.
Proudly Made in the USA
Ashley Sling, Inc. • www.ashleysling.com
™
MUST
Working Load Limit
fit snug in the
DO NOT OVERLOAD.
BM-0065