EasyPro AquaShine WFL2-150 Mode d'emploi, sécurité, garantie - Page 6

Parcourez en ligne ou téléchargez le pdf Mode d'emploi, sécurité, garantie pour {nom_de_la_catégorie} EasyPro AquaShine WFL2-150. EasyPro AquaShine WFL2-150 8 pages. Fountain light kit, stainless steel, warm white led light kits, two-light kits for fountains up to 3/4 hp/three-light kits for fountains up to 2 hp, compatible with fountains and aquafloats and kasco vfx or jf series fountains with one piece float

Imprimer la page

Setting the Timer

Mount the weatherproof controller box in a secure location near a power supply

and plug into 110 volt outlet. The controller is weatherproof and does not need

to be protected from the weather.

Programmable Timer Features

•

Digital electronic time switch with daily programs

•

Repeat programs with 16 on/off settings and manual override

•

Lithium battery power reserve to keep time and programs even in power outage.

•

Auto time error correction +/- 60 sec. weekly

Operation Instructions for Automatic Program Function

1. Plug controller into 110 volt GFCI protected outlet. Red light on timer will come on to indicate

power is being supplied to lights. After timer settings are made, the red light only comes on

during operation of programmed Auto "On" setting or when ON in Manual mode (see Manual

Mode section).

2. Remove clear plastic cover from timer. Be sure not to lose this cover.

3. Unlock the timer by pressing the "C/R" button four times. This removes the "a" character in

lower left corner of the display screen. If no keys are selected in 15 seconds, the time will

automatically lock. Or once programming is finished press "C/R" button to lock.

4. To clear all programs, press the Reset button (labeled as 'c'). It is inset and will require a pen

or small object to depress.

5. Once unlocked, set the time by pressing the button with the clock icon, then use D+ to set

the day of the week, H+ to set the hour (uses military time only) and M+ to set the minute.

6. Up to 16 on/off settings can be programmed using the chart below.

Note: Set times in sequence as you may not cross set. System will auto lock

with no activity or data saved within 15 seconds.

Step

If you do not require 16 settings, press clock icon to the end

Key

Programming

Setting 1 ON time (display 1 on)

H+/M+

Setting hours and minutes to turn on

D+

Daily selects same time or separate times

Setting 1 OFF time (display 1 off)

H+/M+

Setting hours and minutes to turn off

D+

If using the same time everyday, do not press

Repeat 2-6 Set 2-16 ON/OFF time

End

Example

Program Functions

Example

Manual Functions

PROGRAM

AUTO

OFF