EasyPro Stratus SRC50K Instructions - Page 2

Parcourez en ligne ou téléchargez le pdf Instructions pour {nom_de_la_catégorie} EasyPro Stratus SRC50K. EasyPro Stratus SRC50K 2 pages. Repair kit

Press retainer plate with piston cup into cyl-

inder all the way to the piston. The cylinder

can be rotated to align the screw holes. Ap-

ply thread locking compound (Loctite

to retainer screws, torque screws to 10-13

inch-pounds.

10.

Check that orientation of the valve plate(s)

with ports is correct and place over

cylinders.

Check that all external accessories such as relief valves and gauges are not damaged before re-operating product.

(800) 448-3873 • Grant, MI 49327 • www.easypropondproducts.com

Stratus SRC Series Repair Kit Instructions

Remove the cylinder o-ring(s) from the bot-

tom of valve plate(s) and install new o-rings.

222)

11.

Remove old and install new head o-rings in

the o-ring grooves on top of valve plate

Visit easypropondproducts.com/resources for more information

Inspect the leaf valves for damage or wear.

NOTE: There is one intentionally "bent"

leaf valve per set. If leaf valves need to be

replaced, a complete leaf valve plate can be

ordered. The screws holding the leaf valves

are susceptible to breaking which makes in-

dividual leaf valve replacement very difficult.

12.

Reinstall head over valve plate(s) checking

that orientation with ports is correct. Torque

screws to 50 inch-pounds

Unit must be unplugged

before servicing

9156 - 5/17