DICE MediaBridge MB-1500-BMW Manuel d'installation et d'utilisation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} DICE MediaBridge MB-1500-BMW. DICE MediaBridge MB-1500-BMW 2 pages. Integration solution for bmw/mini cooper vehicles
Également pour DICE MediaBridge MB-1500-BMW : Manuel d'installation et d'utilisation (2 pages)

USB iPod operation
• Use DISC 1-6 to enter specific modes (SONG, PLAYLIST, ARTIST,
ALBUM, PODCAST and AUDIO BOOK) when iPod is locked.
• Within each mode, use the track buttons to browse the items
available
• Use Random feature or button on radio to shuffle songs.
Note: if the iPod is unlocked for direct control, radio control will be
limited to Songs, Playlists, and Albums. Text display will also be
limited to show only current song information. It will not show the
name of Playlist / Artist / Album.
15
Troubleshooting
Problem
Check all connections. See if iPod charges while connected to
iPod does not charge.
computer or wall charger. You may need to reset the iPod.
Music is distorted or sound level
Make sure all EQ and BASS boost options are turned off on your iPod.
is too low with iPod connected.
You can set audio base level in DISC 3, see page 6.
Please make sure that the USB connection is not loose. Make sure
that an iPod case is not preventing the dock connector from being fully
Why is the interface not
seated. Disconnect and reconnect the device. If iPod is not responding
controlling the iPod/USB drive?
please try resetting it. USB device must also be FAT16/32 format and
contain supported MP3, WMA or AAC content.
Check for proper connection to the mini DIN 8 receptacle. Make sure
Sirius tuner can't be selected.
that the connector pins are not bent. Make sure to select SIRIUS in
Audio Source Selection (refer to page 6).
Why does the radio display show
USB iPod: the end of a playlist or selection has been reached. Select
"EMPTY/STOP" and no music
a new playlist from DISC2.
plays?
USB Memory: There are no supported audio files on the flash drive.
Problem
Reset the iPod. Verify proper connection to iPod/interface. Check
No audio from iPod source.
for compatibility. Older iPod models don't support USB audio. Hold
switch must be on for 5th generation iPod video.
Verify unit is trying to be accessed as the CD-changer source.
Cannot select the interface.
With ignition off, disconnect vehicle harness from module for a
minute, verify connections and reconnect.
Reset iPod and make sure the most recent iPod firmware is
Radio/ steering wheel controls do not
installed. Check vehicle user manual on how steering wheel
operate iPod.
controls work, long presses may toggle alternate function.
Why does category read
Playback of content selected on the iPod before connected to
"PRESELCTD"?
the interface continues until new content is selected.
What size of USB flash drive
Large capacities are supported, however up to 4GB is
should I use?
recommended for optimal user experience.
10
AUX operation
USB iPod mode
• An auxiliary audio device can be connected to the MediaBridge
change songs
unit through the 1/8" mini-jack
DISC1
TRACK
• Audio device must be controlled manually.
change playlist
DISC2
TRACK
• Audio level can be adjusted while in auxiliary mode by selecting
DISC 1-4 and using track buttons to increase or decrease levels.
change artist
DISC3
TRACK
change album
DISC4
TRACK
change podcast
DISC5
TRACK
change audio book
DISC6
TRACK
14
TTS (Text-To-Speech) configuration
Solution
The default factory TTS configuration would make announcements for the Bluetooth connectivity,
answering / making phone calls, selecting different playing modes, except no song title announcement.
To control how often voice announcements occur, please press the following preset number in sequence:
Preset Sequence
1-3-5-2-4-6-1
1-3-5-2-4-6-2
1-3-5-2-4-6-3
1-3-5-2-4-6-4
Bluetooth configuration
You must be in Bluetooth mode to adjust Bluetooth connectivity setting by enter the following preset
number in sequence:
Preset Sequence
1-3-5-4-5-6
6-5-4-3-2-1
1-6-2-5-3-4
*Up to 4 Bluetooth devices can be stored.
16
Firmware update
Solution
STEP 1:
Disconnect the MediaBridge module from the vehicle.
STEP 2:
Download and install necessary software from www.diceelectronics.com
STEP 3:
Open software to follow instructions for updating MediaBridge unit.
STEP 4:
Plug in MediaBridge via mini USB cable and update.
STEP 5:
Disconnect and reinstall the unit into the vehicle.
AUX mode
DISC1
DISC2
DISC3
DISC4
1/8" mini stereo jack (not included)
Function
Turn off TTS completely
Turn on the phone relative TTS only
Turn on ALL TTS feature
Reset TTS back to factory default configuration
Function
Enable autoconnect (with paired device)
Disable autoconnect
Erase paired device memory*
Mini USB port for software update
11
Sirius Connect
operation (with SIRIUS tuner connected)
TM
SIRIUS display screen:
Channel number * station name * program title
change volume setting
Saving stations:
TRACK
• Single line radios: Tune to desired station. Press RND button and select which DISC to save to (1-6).
change bass setting
Deselect RND.
TRACK
• Navigation radios: Tune to desired station. Press and hold DISC to save as preset.
change mid EQ setting
Sirius mode
TRACK
to store
station
change treble EQ setting
TRACK
DISC 1-6
recall PRESET 1-6 stations
to store
station
• If a Sirius Connect compatible tuner is not detected, then either a "No Tuner" vehicle message is
displayed, or the SIRIUS option will not be selectable.
• Go to Channel 000 to view the Sirius Tuner ID for activation. The 12 digit ID is displayed as "SIRIUS ID"
followed by "123456-789000".
13
Pairing MediaBridge Bluetooth with your cell phone via Bluetooth
1. Turn on the Bluetooth feature on your cell phone
2. Select MediaBridge as your audio source from your radio
3. Search device from your cell phone
4. Select MediaBridge from device list and enter password "0000" to connect
Note: MediaBridge is only discoverable for first 60 seconds after selecting MediaBridge as your radio's
audio soure.
Answering / making a phone call
• To answer an incoming call, press
• To reject an incoming call or terminate an active call, press
• To make an outgoing call, dial on the phone like you would normally
Phone calls interrupt any music / audio that is currently playing on the radio while MediaBridge is
the selected audio source.
Playing music from a cell phone through MediaBridge via Bluetooth
1. Enter Bluetooth mode on MediaBridge
2. Make sure your cell phone is paired with MediaBridge
3. Select and play a song from your cell phone's music player
Note: Some cell phones require you to manually select the option to play music via (A2DP) Bluetooth
Streaming. Song information is shown if your phone has AVRCP1.3.
4. Use the Next / Previous track buttons to change songs on the AVRCP compatible phone.
17
Disclaimer and warranty
Important disclaimer, please read!
Unauthorized reproduction or reverse engineering is strictly prohibited! Intellectual property included is distributed
under specific license agreement with respective owners and is licensed only, not sold. No warranty, explicit or
implied, is stated. Neither DICE Electronics, LLC., nor any of its agents, distributors, dealers or vendors shall be
liable for damages.
IN NO EVENT SHALL DICE ELECTRONICS' LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT
FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE OR ITS DOCUMENTATION.
Warranty and Support
Products carry a 90 day limited warranty that protects you from defects in material and workmanship of products
sold by DICE Electronics, or its authorized agents, distributors and dealers. The warranty period begins the day a
product is purchased by the end user. Products found to be defective during the warranty period will either be
repaired or replaced by DICE Electronics at no charge unless warranty is void. Unauthorized attempt of repair or
alteration of the product in any way immediately voids this warranty. Warranty does not extend to cosmetics or
finish. A DICE product specialist must determine that defect is present in the product and issue an RMA. Be sure
that all wiring is connected as described in the user manual and all related equipment is functioning properly.
DICE Electronics disclaims any liability for other incurred damages resulting from product defects. Any expenses
in the removal and reinstallation of products are not covered by this warranty.
If experience any problems or need help, please contact your local dealer or call 888-342-3999, or visit our
support site at http://www.diceelectronics.com/support.
12
Common Control
change channel
TRACK
None-Navigation radios
RND
DISC 1-6
store current station to PRESET 1-6.
then
When done, press RND again to deselect
Navigation radios
DISC 1-6
store current station to PRESET 1-6
(Next track)
(Previous track)