Bionaire BAP242S Manuel d'instruction - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Bionaire BAP242S. Bionaire BAP242S 2 pages.

Imprimer la page

BAP242S-IUK_07EM1.qxd

7/4/07

9:55 AM

Page 4

Fig. 1

A. Inlet Grill

E. Ioniser Control

B. Washable Foam Pre-filter

F. Ioniser Light

C. Speed Control

G. HEPA-Type Filter

D. Filtered Air Outlet

H. Power Cord

Fig. 2

Fig. 3

U.K. and IRELAND

PLEASE READ AND SAVE THESE

IMPORTANT INSTRUCTIONS.

With proper care and use, this Bionaire

air purifier will give you fresh, clean air

for many years.

NOTE: Before reading these instructions, please

unfold the back page for the corresponding illustrations.

SAFETY PRECAUTION

Carefully read and retain all instructions before

using the air purifier.

• To avoid fire or shock hazard, check that the

voltage on the product corresponds to your

electricity supply and plug directly into an

electrical outlet.

• To avoid fire hazard, never put the cord under

rugs, or near any heat source.

• Carefully discard any plastic wrapping that

was used for the packaging.

• Do not use the air purifier outside.

• Do not place the unit near any heat source or

in direct sunlight.

• Always unplug the air purifier before removing

the grill, changing the filters, cleaning the air

purifier or whenever it is not in use.

• Do not use in or around water or any other

liquids. Do not attempt to wash the unit under

running water.

• Use appliance only for intended household

use as described in this manual.

• Ensure that all air openings are not restricted

or covered in any way.

• Do not place anything on top of the unit.

• Never insert any object into any openings.

• Do not use the air purifier if any part is

missing or damaged in any way.

• Do not attempt to repair or adjust any

mechanical functions of this unit. If the unit

becomes damaged return to the place of

purchase or phone the helpline number on

the back of this leaflet.

• If the supply cord or plug is damaged, it must

be replaced by the manufacturer or its service

agent or a similarly qualified person in order

to avoid hazard.

• The air purifier contains no user serviceable

parts and should the product suffer damage

or breakdown it must be returned to the

manufacturer or its service agent.

• Should the air purifier stop working, first

check the fuse in the plug (UK only) or

fuse/circuit breaker at the distribution board is

operating, before contacting the manufacturer

or service agent.

• This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or lack

of experience and knowledge, unless they have

been given supervision or instruction concerning

use of the appliance by a person responsible for

their safety. Children should be supervised to

ensure that they do not play with the appliance.

HOW THE AIR PURIFIER WORKS

Dirty, dust laden air is drawn through the front of

the air purifier and through the multi-stage

filtration system.

1. The baking soda filter will help clear odours

making the air cleaner and fresher.

2. The HEPA filter entraps 99% of all smaller

visible and non-visible particles down to 2

microns in size.

PRODUCT FEATURES

Quiet operation -

Your air purifier has been designed to be

unobtrusive around the home and to be very

quiet. The motor provides quiet performance

and durability necessary for continuous use.

Dual position -

The unit can be placed either upright or on its side,

flush against the wall. When positioning the unit be

sure that the air inlet grill, filters and air outlet grill

are not blocked, to ensure maximum air flow.

Ioniser -

Your Bionaire

Air Purifier has an independently

controlled ioniser, which when turned on,

releases negative ions into the outgoing filtered

air. Ions are tiny particles that carry either a

positive or negative charge. These ions exist

naturally all around us in the air, water and

ground. Both positive and negative ions are

colourless, odourless and completely harmless.

Negative ions help the air purification process

by attaching themselves to very small airborne

particles in the room. These particles take on a

negative charge and may join with positively

charged particles, such as dust, pollen, smoke

and pet dander to form larger particles that are

then more readily captured by the filter system,

or they may be attracted to positively charged

surfaces like walls or floors.

You may also note, after extended use, that dust

may have collected around the grills or front

panel. This is from the ionisation effect caused

by the negative ions exiting from the air outlet.

This dust does not come from the air output, but

is drawn out of the uncleaned air going past the

air outlet. This is additional evidence of the air

cleaning effectiveness of negative ions. The

dust can be easily removed with a clean,

dampened cloth or soft brush.

PLEASE NOTE: it is important to change the

3. The filtered air outlet on the top of the unit

HEPA filter at recommended intervals. Using the

can be cleaned of dust with a small, soft brush.

ioniser in conjunction with dirty filters may result

4. If you wish to clean the inside of the air

in dirty particles exiting the air purifier and being

purifier, please only use a dry, soft cloth to

attracted to walls, carpets, furniture and other

wipe it down.

household objects, These dirty particles may

prove very difficult to remove.

FILTER REPLACEMENT

IMPORTANT: IN ORDER TO RETAIN THE

PRE-OPERATING INSTRUCTIONS

EFFICIENCY OF YOUR AIR PURIFIER, THE

1. After removing the unit from the box, remove

HEPA FILTER NEEDS TO BE CHANGED

the plastic covering from the unit.

EVERY 3-6 MONTHS.

2. Select a firm level place where there are no

1. Every few weeks check the condition of the

obstructions to the air inlet (front grill) or

prefilter.

filtered air outlet (top of the unit)

2. Remove the front grill. If the foam pre-filter has

3. Remove the front grill by pulling the grill

collected a noticeable amount of dust, remove

towards you (see Fig 2)

it from the inlet of the grill and wash it in warm

4. Remove the HEPA filter by gripping on both

soapy water. Rinse and dry the pre-filter

sides and pulling forward.

thoroughly before replacing it in the inlet of the grill.

5. Remove protective plastic bag from the filter

3. With the front grill removed, remove the

cartridge. The filter clip can only be attached

HEPA cartridge and dispose in the dustbin.

to the hang tabs on the filter one way (see

DO NOT try to wash and re-use the HEPA

Fig 3). The filter clip should easily slide onto

filter Replace with a new HEPA filter -

the filter hang tabs. Do not use force whilst

HAPF30 removing the protective plastic bag

attaching the filter clip to the filter. Align the

before inserting into the air purifier.

clip on the top of your HEPA filter with the

4. Align the clips on the top of your HEPA filter

rails on the inside of the unit.

with the rails on the inside of the unit. Gently

NOTE: The pleated material and rubber gasket

slide the filter onto the rails.

should be facing towards the unit when applied.

5. The filter clip should easily slide onto the filter

6. Replace the front grill by sliding back on to

hang tabs. Do not use force while attaching

the unit. Make sure that it snaps securely into

the filter clip to the filter.

position (the grill only goes on one way).

Align the clip on the top of your HEPA filter

NOTE: Do not point outlet towards wall.

with the rails on the inside of the unit.

NOTE: The pleated material and rubber

OPERATING

gasket should be facing towards the unit

1. Plug into a suitable 220 – 240V electrical outlet.

when applied.

2. Select the required operating speed: Hi (III),

6. Replace the front grill by sliding back on to

Medium (II), Low (I) by sliding the switch to

the unit. Make sure that it snaps securely into

the appropriate setting.

position (the grill only goes on one way)

3. To release negative ions into the filtered air

NOTE: Do not point outlet towards wall.

slide the ioniser button to ON. The amber

light will illuminate.

REPLACEMENT FILTERS :

4. The ioniser will not work unless the unit is running.

HAPF30 HEPA Filter

5. For optimum air filtration, it is recommended to

For UK only - Customer Service

operate the air purifier continuously. Its rugged

Helpline 0800 052 3615

motor is designed to give many years of service.

Filter Sales Order Line - 0870 759 9000

6. For continuous use it is recommended to

operate the air purifier at the medium (II) setting.

SERVICE INSTRUCTIONS

For quieter operation or use in a bedroom,

1. Do NOT attempt to repair or adjust any

select the Low (I) setting. When high levels of

air polution are present, select the HI (III)

electrical or mechanical functions on this unit.

Doing so will void the warranty. The insides of

setting to quickly circulate clean filtered air.

the unit contain no user serviceable parts.

CLEANING AND MAINTENANCE

Only qualified personnel should perform all

1. Turn the air purifier off and unplug it before

servicing.

cleaning.

2. If you need to exchange the unit, please

return it in its original carton, with a sales

2. The outside of the air purifier can be cleaned

with a soft, clean dampened cloth.

receipt, to the store where you purchased it.