Easyrig STABIL Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Easyrig STABIL. Easyrig STABIL 2 pages.

Easyrig STABIL User Manual - rev.02 - 2019-04-30

Adjust according to your height

Open the Vario 5 cover, turn the 4 nuts in

each corner counter-clockwise. Now, you

will be able to slide the power pack up or

down according to your height or what

shots you want to achieve. See Vario 5

user manual for further details.

Adjust according to your height

To raise the upper arm further, release

the two screws on the upper block

(under the rubber bellow).

Important: The power of the Vario 5

power pack needs to be at its lowest

before attempting this. The highest

setting possible is when the tube is level

with the nylon block, going further than

that can cause damage to the user or

equipment.

If you are lowering the block, make sure

to pre-stretch the line with 5cm/2".

Locking the arm

To lock the Easyrig STABIL in 90 de-

grees, line up the holes and insert the

pin. The pin is located in the base of the

Easyrig STABIL arm. The locking pin

needs to be screwed on until it is level

with the side of the arm.

Go to our website (Support -> Service

Videos & Manuals -> Easyrig STABIL)

for instructions on how to mount the

Easyrig STABIL onto your Easyrig.