Dickinson Spitfire180 Manuel d'utilisation et d'installation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} Dickinson Spitfire180. Dickinson Spitfire180 16 pages.
Également pour Dickinson Spitfire180 : Manuel d'utilisation et d'installation (16 pages)
Imprimer la page
Cleaning and Maintenance
1)
Clean grease from the drip tray and the base of the Spitfire regularly.
2)
Clean burner and burner orifice seasonally. The burner orifice can be
removed for thorough cleaning with hot water and a bronze wire
brush.
The Spitfire stainless top lid and main body will eventully discolor
3)
with heat.
4)
A defective spark igniter is uncommon. If the igniter does not work, it
will be caused by grease build-up on the wire electrode or by the
igniter mount not being grounded to the body of the barbecue during
assembly. The igniter can be cleaned with hot water and a cloth.
Cooking
The removable drip tray must be installed prior to cooking. Do not allow
grease to build-up in the grease tray or in the base of the Spitfire. The
porcelain enamel cooking surface plates should be pre-heated and sprayed or
covered with cooking oil to prevent food from sticking. Accumulated grease
will burn off if the cooking plates are turned over. Barbecues will get hot
and splash grease, and for safety reasons it is therefore advisable to mount
the unit outboard.
Spitfire180 Accessories & Parts Available
#15-150A
#15-150F
#15-187
#15-150P
#15-171
#15-203
#15-188
#15-189
#15-191
#15-192
#15-178
#15-193
Universal Rail Mount Kit
Fishing Rod Holder Mount Kit
Taff Rail Mount Kit
Scotty Mount Kit
Black Vinyl Cover
Aussie griddle pan (8" x 11")
6 ft. Propane Hose – High Pressure
8 ft. Propane Hose – High Pressure
6ft. Propane T Type Hose – High Pressure
8ft. Propane T Type Hose – High Pressure
"T" type Connector
Low pressure Control Valve
10