Dickinson Newport P1200000-NEW-P12000 Manuel d'installation et d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Dickinson Newport P1200000-NEW-P12000. Dickinson Newport P1200000-NEW-P12000 11 pages. Propane fireplace/heater

Imprimer la page

www.ahoycaptain.com

holes in the flexible pipe and install sheet metal screws to secure.

DIRECT VENT FITTING

Combustion Gases

Outside Air for Combustion

Deck

GAS SUPPLY AND HOOK-UP

THE HEATER OPERATES ONLY ON LOW PRESSURE LPG GAS (11"w/c)

If there is a propane fuel system installed a separate supply line must be supplied for the heater.

This line must be equipped with a low-pressure regulator (Dickinson Part No. 19-151)

Connect to the 3/8" flare connector of the heater with copper or an approved hose. During this

procedure some particles may get into the fuel line. These could block or restrict the small heater

orifice. BLOW OUT FUEL LINE PRIOR TO ATTACHING TO THE PROPANE SUPPLY AND

THE HEATER.

Disposable Propane Bottle

It is necessary to install a pressure regulator for gas supplied from a propane bottle.

For this

type of installation we suggest using a Dickinson Low Pressure Kit (Part No. 19-150) This Kit

includes a pressure regulator (11 ins W/C) and a mounting kit. The kit must be mounted

outside.

A Dickinson AGA/CGA propane hose can be used to connect this Kit to the heater.

These are available in 10 ft ( 3m) (Part No. 19-100-10) or 20 ft (6m)(Part No. 19-100-20)

AFTER GAS HOOK-UP AND BEFORE LIGHTING THE HEATER

TEST ALL GAS AND CONNECTIONS FOR LEAKS WITH A

SOAP SOLUTION