Dickson HT100 Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Dickson HT100. Dickson HT100 12 pages. High-temp logger operation

Getting Started

•

Install the DicksonWare™ Software.

•

Connect the cable (supplied with the software) to the logger and to a working serial port on your

computer.

•

Click the Setup button. When the setup window appears, all fields should be automatically filled in,

this will confirm that DicksonWare™ has recognized the logger. Should all fields remain blank, refer to

"No Communication" in the Trouble Shooting section of this manual. Once DicksonWare™ recognizes

the logger, press the Clear button. This will delete all data currently stored.

•

The logger is now sampling and ready for use. The default sample interval is 1 minute. You may

choose to change Default settings for sample interval and start-date and time. When changing

these settings, the logger will automatically go through the clear process to accept your changes.

Note: To conserve battery life when storing unit, press the Setup button and select the shortest Sample

Interval and Stop When Full in the Samples section. Do not expose download cable to temperatures above

175˚F

*WARNING*

Fire, explosion and server burn hazard. Do not recharge, disassemble, heat above 145˚C, incinerate, or

expose battery to water.

Rev. 07/07