Alpha ESS M48112-P Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Alpha ESS M48112-P. Alpha ESS M48112-P 8 pages. Battery module

Imprimer la page

1. Error and Alarm Code

Error Code

LED Ring

Error Code

Error 01

Error 03

Error 05

Red light

flickering

Error 06

every 3

Error 07

seconds.

Error 08

Error 09

Error 10

5. Emergency Situations

AlphaESS cannot guarantee M48112-P absolute safety

Fire

In case of fires, make sure that the following equipment is available near the system.

★ SCBA (self-contained breathing apparatus) and protective gear in compliance with the Directive on

Personal Protective Equipment 89/686/EEC.

★ Novec 1230, FM-200, or dioxide extinguisher.

Note:

ABC extinguishers are not effective when the battery pack is on fire.

Batteries may explode when heated above 150°C. If possible, move the battery pack to a safe area

before it catches fire.

Leaking Batteries

If the battery pack leaks electrolyte, avoid contact with the leaking liquid or gas. If one is exposed to

the leaked substance, immediately perform the actions described below.

★ Inhalation: Evacuate the contaminated area, and seek medical attention.

★ Contact with eyes: Rinse eyes with flowering water for 5 minutes, and seek medical attention.

★ Contact with skin: Wash the affected area thoroughly with soap and water, and seek medical

attention.

★ Ingestion: Induce vomiting, and seek medical attention.

LED Display

Description

Hardware Error

Circuit Breaker Open

DIP Difference

LMU Disconnect(Slave)

SN Missing

LMU Disconnect(Master)

Wait for automated recovery.

In case problem is not resolved,

call in for repair.

Close circuit breaker after Shutting down

the battery system.

Keep consistence of DIP switches,

restart the system.

Reconnect the communication cable

Enter the serial number, restart the system

or call in for repair.

Reconnect the communication cable.

- 03 -

Description