EPAX E10 5K Manuel de l'utilisateur - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} EPAX E10 5K. EPAX E10 5K 20 pages. Lcd resin

Section VII. Warnings

When you ﬁnd that a print has failed or there is solid residue in the resin vat, you must

ﬁlter the resin in order to protect the LCD. Clean the resin in the resin vat by ﬁltering out the

solid residue using one of the provided ﬁlters or a paint ﬁlter which can be found online or at

your local hardware store. If ignored, when the build plate dips into the vat, the force of the

plate may crush residues, puncture the ﬁlm and damage the LCD. This is a costly mistake.

If there is residual resin in the resin vat or on the build plate's outer surface, please clean with

a soft tissue soaked in IPA to avoid it dropping into the machine and curing inside.

Always wear gloves, a respirator mask and protective goggles when handling liquid

resin or a print before the post-processing. Only touch the print without gloves after it's

been fully cleaned and cured!

Print in a well-ventilated area. It is strongly recommended to use a vent fan drawing air

around the printer to outside the building. Resin fumes can cause lung irritation!

It is strongly recommended that you watch our tutorial videos before

● For printer instructions, videos, ﬁrmware updates, and more please visit www.epax3d.com.

● You can also search "EPAX 3D" on Youtube.

● Customer Support Email: [email protected]

● For printer replacement parts, supplies and a variety of resin options, visit

www.epax3d.com.

Join us on our Facebook group for active discussions and knowledge-sharing:

https://www.facebook.com/groups/epax3d/

operating your printer for the ﬁrst time.