Alpha Fan PRIMA-5B/56 LED Manuel d'instruction - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Alpha Fan PRIMA-5B/56 LED. Alpha Fan PRIMA-5B/56 LED 8 pages.
Imprimer la page
Step 5
a. Connect the Connectors from Fan and Receiver.
b. Connect the wires from the receiver to House's Supply Wire.
c. Connect Earth Wire to House Supply Earth Terminal.
House Supply Wires
Brown (L)
Blue (N)
Orange
Blue
White
Yellow
Grey
Step 6
Install the Blades on Motor with Screw.
Step 7
Install Lamp Shade by twisting in.
Green/Yellow (E)
Green/Yellow(E)
Orange
Blue
Brown (L)
Blue (N)
White
Yellow
Grey
Green/Yellow(E)
6
Step 8
Below shows a complete installation diagram.
TRANSMITTER LEARNING PROCESS
IMPORTANT : DO NOT CONNECT THIS REMOTE CONTROL CEILING FAN TO DIMMER
SWITCH OR REGULATOR.
The receiver & transmitter is pre-programmed in factory. If you wish to control 2 or more fans using
1 transmitter, the below steps are required.
DO NOT PRESS ANY OTHER BUTTON DURING THIS PROCESS
Step 1
a) Insert the 2 pcs of batteries (provided) into transmitter.
b) Turn on the power supply (wall switch) to the fan.
c) Within 30 sec, press and hold the "LEARN" button for 3 sec. Once the receiver has detected the frequency,
transmitter will "Beep Beep" twice. Programming process is completed and fan is ready to use.
If the fan is not responding to the transmitter, repeat Step 1b.
Transmitter
Learn
Press and hold
for 3 sec
7