EPC EP-1000 Manuel de référence technique - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel de référence technique pour {nom_de_la_catégorie} EPC EP-1000. EPC EP-1000 20 pages. Dc motor speed control

Imprimer la page
Internal components for the EPjr are shown in Figure 6 of the previous page. Other than
the main processor, the internal components of these controllers are NOT user-
serviceable. The following part numbers are provided for authorized service technicians
only.
The replaceable system processor is located on the Main System Board (electronics
board). When replacing the processor, use caution not to damage the surrounding
electronic components.
EP-Junior (Prior to 2011)
OEM
PART #
PowerEx
CM600HA-24A
PowerEx
RM300HA-24S
EPCOS
B43991-A4208-Q1 Electrolytic Capacitor – 2000uf / 400 to 450V
TPC
FSG86-9302
Aerovox
RBPS
EPC
EPJR-MB
TDK
PH-FF
EPC
EPJR-H2
EP-Junior (2011 - 2014)
OEM
PART #
PowerEx
CM600E3U-NFH
EPCOS
B43991-A4208-Q1 Electrolytic Capacitor – 2000uf / 400 to 450V
TPC
FSG86-9302
Aerovox
RBPS
EPC
EPJR-MB
PowerEx
VLA502-02
EPC
EPJR-H2
INTERNAL COMPONENT IDENTIFICATION
(CONTINUED)

REPLACEMENT PART NUMBERS

Description for Replacement (including limits)
IGBT Module – 1200V / 600A
Freewheel Diode Module - 300V / 300A
Film Capacitor – 100 to 200uf / 600 to 1200V
Snubber Capacitor - 0.22 to 0.33uf / 800 to 1200V
Processor and Control Board for IGBT
Power Supply +20V
Wiring Harness (includes bulkhead)
Description for Replacement (including limits)
IGBT Module – 600V / 600A
Film Capacitor – 100 to 200uf / 600 to 1200V
Snubber Capacitor - 0.22 to 0.33uf / 800 to 1200V
Processor and Control Board for IGBT
IGBT Gate Driver (mounted on EPJR-MB)
Wiring Harness (includes bulkhead)