Dictator DICTAMAT 900-21 ZLB Manuel technique - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel technique pour {nom_de_la_catégorie} Dictator DICTAMAT 900-21 ZLB. Dictator DICTAMAT 900-21 ZLB 17 pages. Ac-21 sliding door operators

Imprimer la page

1)Security Advice

2) Controls before

Installation

Tel. +49-821-24673-0 · Fax +49-821-24673-90 · E-Mail [email protected] · 1120

Installation Instruction for Sliding Door Operators

DICTAMAT AC 900-21

It is essential to follow the operating instructions to guarantee for a

safe operation and in case of warranty claims. Defects due to not

obeying the operating instructions void any warranty claims. The

manufacturer and distributor assume no liability for damages and

subsequent damages resulting from inappropriate operation and

for any damages to property or persons due to wrong operation or

not obeying the operating instructions.

This technical manual contains important advice for the service. It

should be kept near the door operator.

In addition to the technical manual please pay attention to the

warning and security signs on the installation.

The DICTAMAT door operator has exclusively been designed to

automatically operate sliding doors/gates together with a

DICTATOR control system. The manufacturer and distributor

assume no liability for any applications not corresponding to the

defined use.

A precondition for permanent and safe operation of the DICTAMAT

door operator is regular maintenance. This has to be effected by

professionals. In case the maintenance is not realized regularly or

not by authorized personnel, the manufacturer or distributor is not

liable for damages and their implications. We recommend you

place a contract with your distribution partner.

Subsequent changes of the DICTAMAT door operator may only be

effected by authorized personnel. In case it is not at once possible

to remedy failures which could lead to dangerous situations, the

operator of the installation has to be informed and the installation

has to be put out of action. The repair has to be done as soon as

possible.

The electrical installation has to be effected by an

authorized professional. Please observe the regulations

concerning the correct dimension of the motor feeding lines.

The door/gate has to be provided with fixed mechanical final

stopping devices. They are needed for the teaching run if you

use an incremental encoder.

a) Is the door operator complete?

- operator

- idler pulley

- belt fixing device with belt tensioner

- toothed belt/chain

- control system

b) Is the door/gate running smoothly?

Technical Manual

DICTAMAT AC 900-21

Page 04.020.01