Dictator DICTAMAT 900-21 ZLB Manuel technique - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel technique pour {nom_de_la_catégorie} Dictator DICTAMAT 900-21 ZLB. Dictator DICTAMAT 900-21 ZLB 17 pages. Ac-21 sliding door operators

Technical Manual
DICTAMAT AC 900-21
Page 04.020.06
Maintenance, Servicing
To guarantee the correct functioning of the door/gate and a long
operational life of the door operator, the whole installation should
be controled and serviced every month. The following controls
should be effected:
a) Is the complete area of the door in the opening and
closing direction free of obstacles?
If necessary, apply floor markings or renew them.
b) Check all fixings of the door and door operator,
including the belt fixing device and the idler pulley.
c) Check doors/gates for damages:
- bent closing edges and
- bent frames (they may prevent the complete closing)
d) Check the fittings for damages:
lock, latch, door handle(s), damper, running gear, rail etc.
e) Check the connection cables for damages.
f) Check the drive belt for damages and wear.
g) Check the tension of the belt. The belt may not skip.
h) Check the final positions OPEN/CLOSE. (Does the dorr
operator switch off?)
i) Check the speed when opening/closing. (Does it meet the
regulations?)
(The closing edge of doors/gates moving too fast is extremely
dangerous.)
j) Check the function of all push buttons and safety
elements (light barriers etc.).
k) All defective parts have immediately to be repaired or
replaced.
l) The results of the maintenance and checks as well as
the effected repairs have to entered into the
maintenance book and the operator of the installation
has to be informed.
We recommend a service at the latest after one year or
100 000 movements.
© DICTATOR TECHNIK GMBH · Gutenbergstr. 9 · 86356 Neusäß · GERMANY
Tel. +49-821-24673-0 · Fax +49-821-24673-90 · E-Mail [email protected] · 1120