Alpha Microsystems AM-212-20 Manuel d'instructions d'installation - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Alpha Microsystems AM-212-20. Alpha Microsystems AM-212-20 18 pages. Scsi 3-1/2” floppy diskette drive

Imprimer la page

Page 8

SYSTEM AMH.DVR[1,6]/N /F:AMOS /D:1.44

;

;Load AMOS compatible high density driver

The AM-212-20 diskette drivers require the SCSI dispatcher for your system. Your system initialization

file probably already loads and initializes the appropriate dispatcher, and therefore should not require

changing when adding the AM-212-20 to your system. There should be a line similar to:

SCZDSP SCZ138 /arguments

Testing the initialization file

When you have finished editing the

Warn other users on your system that you will be rebooting the system, then use the

to reboot. For example:

MONTST AMOS32,TEST

Watch the terminal screen to make sure your computer boots without error. If the system boots

successfully, copy your test initialization file to your "real" initialization file name. For example:

LOG SYS:

COPY AMOS32.INI=TEST.INI

Note: You can change your CMOS boot settings instead if desired.

You must create and install different drivers for each format diskette you will use on your system. For

example, if you use AM- SCSI format and PC format 1.44MB diskettes, you will need two drivers

(

FLH:

and

PCH:

). Usually, these will be copies of the one made with

format uses read-ahead.

Formatting and initializing a diskette

Follow the steps below to format and initialize a native SCSI format diskette.

These steps erase all data on the diskette! Before you use the format program, make sure the

diskette is blank, or does not contain files you need!

Insert the diskette into the drive; don't use the

LOG OPR:

FMSFLP

See the FMSFLP command reference sheet at the end of these installation instructions.

Installation Instructions: AM-212-20 3-1/2" Floppy Diskette Drive

;SCSI dispatcher for AM-450

;arguments will depend on

;your particular system

;configuration

TEST.INI

file enter

MOUNT

command. Instead enter:

RETURN

to finish and exit from

MONTST

FIXLOG

. Only the AM-SCSI

PDI-00212-20, Rev. A01

AlphaVUE

program