Didactum Monitoring System 500 II DC Manuel de démarrage rapide

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Didactum Monitoring System 500 II DC. Didactum Monitoring System 500 II DC 2 pages.

Imprimer la page

Thank you,

for choosing Didactum`s IP-based remote monitoring solutions.

By using high-quality components, it can be ensured that the Didactum products for many years to work properly.

The production of Didactum`s monitoring systems takes place within the European Union (E.U.) and are subject to continuous quality assurance.

For the manual for your Didactum Monitoring System and other important information about the sensors, CAN devices and expansion units, please

visit our knowledge base:

https://www.monitoring-hardware.com/

Quick Start Guide:

Connection scheme of Didactum Monitoring System 500 II DC:

Fig.: Here you see the connections of your 48VDC remote monitoring device 500 II-DC.

Assign the IP address of your Didactum remote monitoring unit

All networked Didactum monitoring units have a built-in web interface. To access this webGUI, you just have to use an web browser.

In the command line of your web browser, please insert the IP address of your Didactum monitoring unit. The default IP address of

this device is 192.168.0.193

Note: Didactum relies on HTML5. Please make sure that you are using the latest version of your web browser.

All networked Didactum monitoring systems were tested under Chrome, Firefox and Safari. Please check that you are using latest version of Java.

If necessary, you can download here: http://www.java.com

Default settings of your monitoring device:

DHCP Client

Hostname

IP address of device

Network mask

Broadcast

Gateway

Primary DNS

disabled

didactum

192.168.0.193

255.255.255.0

192.168.0.1

192.168.0.255

192.168.0.1