Alpha Motors WSERD30B Manuel - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Alpha Motors WSERD30B. Alpha Motors WSERD30B 4 pages.

Imprimer la page

11. CODE DELETING

Method A:

This method deletes all channels from the remote you are holding from the motor.

Press the UP and DOWN

buttons simultaneously.

Method : B

This method deletes all channels from all remotes from the motor's memory.

Press UP and DOWN

buttons simultaneously.

12. ASSIGNING AN ADDITIONAL REMOTE

EXISTING

Press UP and DOWN together

and release on the existing remote.

13. THE THIRD LIMIT

First, move the blind to the desired position.

A. Set the Third Limit

Move the blind to the desired

position and press STOP 4 times.

B Reset

the Third Limit

Move the blind to the desired

position and press STOP 4 times.

WSERD30B MOTOR GUIDE p3

ALPHA SUPPORT PHONE (02) 4355 4775

Press the STOP button

7 times within 10s.

Press the STOP button

6 times within 10s.

EXISTING

Press STOP 8 times,

the motor will vibrate.

First, move the blind to the desired position.

Note: The third limit is also named as the intermediate limit, it is available at any position between

up and down limit. The third limit will be deleted automatically if the up or down limit is deleted.

The motor will vibrate; it means the

current position is set as the third limit.

The third limit will be deleted automatically if the up or down limit is deleted.

The motor will vibrate; it means the

current position is set as the third limit.

Press the UP button once

within 10s, the motor will vibrate.

Press the UP button once within

10s, the motor will vibrate.

NEW

Press UP and DOWN together

and release on the new remote.

All channels from the remote you

are holding are now deleted from

this motor. Others will remain.

All the remote channels in the

motor's memory are deleted.

NEW

Press STOP once and the motor

will vibrate. The new remote channel

will now operate the motor.

press for 2 seconds

Press the STOP button for 2s, the motor

will run to the third limit position from any

other current position.

press for 2 seconds

Press the STOP button for 2s, the motor

will run to the third limit position from any

other current position.