Axis NPS 530 Manuel d'installation rapide - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Axis NPS 530. Axis NPS 530 10 pages.

NetWare

The procedure below applies to the NPS 530/532 Print Server Mode

only and is recommended only if you have a small network with just a

few file servers. If you prefer to use the Remote Printer Mode or if

you have a larger network, see the NPS 530/532 User's Manual.

Setup and printing is done using the Novell PCONSOLE and

CAPTURE applications respectively. If you need to configure your

NPS 530/532 beyond the PCONSOLE capabilities, refer to the

User's Manual.

Add a Print Server:

1. Log in as Supervisor to a file server from a client work station.

2. Start PCONSOLE. Press <F4> for Bindery Mode if you are using

NetWare version 4.xx

3. Select Print Server Information (NetWare 3.xx) or Print Servers

(NetWare 4.xx).

4. Press <Insert> to add a new Print Server.

5. Type the print server name as AXIS<nnnnnn> (<nnnnnn> are

the last six digits of your NPS 530/532 serial number). Press

<Enter>.

6. Press <Escape> to return to PCONSOLE main menu.

Repeat this procedure for each file server using the NPS NPS

530/532.

Link a Print Queue to the Print Server:

1. Select Print Queue Information (NetWare 3.xx) or Print Queues

(NetWare 4.xx) from the PCONSOLE main menu. If you plan

to use an existing queue, skip to step 4.

2. Press <Insert> to add a new print queue.

3. Type a queue name, and press <Enter>

4. Select the queue to be serviced by your NPS 530/532.

5. Select Queue Servers (NetWare 3.xx) or Print Servers (NetWare

4.xx) in the Print Queue Information menu.

6. Press <Insert> to display the Queue Server Candidates.

7. Select AXIS<nnnnnn>.

8. Press <Escape> to return to the main menu.

Restart your NPS 530/532 (power-off/power-on) to connect your

print queues.