Axis STAV20 Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Axis STAV20. Axis STAV20 16 pages. Vertical automatic stand

Imprimer la page

_____________________________________________________________________________________________________________________

11.2 Manual, Peak, Cycle and Step mode

Manual mode enables to move the force meter by using the knob on the keyboard.

Peak, Cycle and Step modes are simplified modes of Advanced mode.

Peak – used when user wants to measure single peak force.

Cycle – used when user wants to perform many cycles on a object to check its

durability.

Step - used when user wants to set motion steps based on force meter movement

up and down.

12. Main menu

After turning on the stand following menu appears:

User by turning knob changes selected position on the screen and enters it by

pressing the knob or → key. Exit from selected option by pressing ←.

12.1 Home position

Home position – this option moves the force meter to base position. STAV will

also remind about that before loading motion program.

Thanks to base position driver can evaluate start position.

Setting base position is required to use automatic modes.

USER MANUAL

Main menu

1. Home

position........

2. Force gauge

3. Applications

4. Configuration

5. Info

6. Service

Reference position