Axis T8705 Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Axis T8705. Axis T8705 11 pages. Network video decoder with axis companion cameras
Également pour Axis T8705 : Manuel d'intégration (4 pages)
Imprimer la page
AXIS T8705 Video Decoder
Setup
Setup
About the product's built-in help
You can access the built-in help through your product's web page. The help provides more detailed information on the product's
features and their settings.
There are two help features in the user interface:
•
To get general information about the controls on each page, click
•
To get detailed information about an individual setting, click
How to configure a monitor
1. Go to Display.
2. Select one of these options under Multi mode:
-
To show the video sources one at a time in sequence, select Sequencer, and set the interval that each source
is displayed.
-
To show multiple video sources at the same time, select Multiview, and select a layout.
3. Under Video output, select a resolution and refresh rate that works with your display. See the documentation for your
display.
How to add Axis cameras
Note
The camera wizard only works with Axis cameras. Add cameras from other brands one at a time. See How to add a single
camera on page 6 .
1. Go to Video sources.
2. Click Camera wizard.
The wizard searches the network for Axis cameras.
3. When you open the camera wizard, the Add credentials window opens automatically. If you don't want to add any
credentials, close the window.
4. Select the cameras to add and click Connect.
The decoder will try to access the camera with all saved credentials. See How to add usernames and passwords for
cameras on page 7 .
5. To access more settings for the cameras, see Advanced camera settings on page 7 .
How to add a single camera
1. Go to Video sources.
2. Click Add camera.
-
For an Axis camera: Enter a name and IP address for the camera.
in the bottom right corner of the browser window.
next to the setting.
6