DieHard 200.71225 Manuel de l'opérateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} DieHard 200.71225. DieHard 200.71225 20 pages. Microprocessor controlled, fully automatic operation battery charger with engine starter plus battery and alternator tester for 6 and 12-volt batteries
Également pour DieHard 200.71225 : Manuel du propriétaire (17 pages)

Imprimer la page

FOLLOw THESE STEPS wHEN BATTERY IS OUTSIdE VEHICLE.

A SPARK NEAR THE BATTERY MAY CAUSE BATTERY EXPLOSION.

TO REdUCE RISK OF A SPARK NEAR BATTERY:

7.1

Check polarity of battery posts. POSITIVE (POS, P, +) battery post usually

has a larger diameter than NEGATIVE (NEG, N, –) post.

7.2

Attach at least a 24-inch-long 6-gauge (AWG) insulated battery cable to

NEGATIVE (NEG, N, –) battery post.

7.3

Connect POSITIVE (RED) charger clip to POSITIVE (POS, P, +) post of

battery.

7.4

Position yourself and free end of cable as far away from battery as pos-

sible – then connect NEGATIVE (BLACK) charger clip to free end of cable.

7.5

Do not face battery when making final connection.

7.6

When disconnecting charger, always do so in reverse sequence of con-

necting procedure and break first connection while as far away from bat-

tery as practical.

7.7

A marine (boat) battery must be removed and charged on shore. To

charge it onboard requires equipment specially designed for marine use.

•