Axis M1045-LW Manuel de l'utilisateur - Page 19
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Axis M1045-LW. Axis M1045-LW 20 pages.
Également pour Axis M1045-LW : Manuel de l'utilisateur (16 pages)
Imprimer la page
AXIS M1045-LW Network Camera
Specifications
Specifications
LED indicators
Note
The Status LED can be configured to flash while an event is active.
Status LED
Unlit
Green
Amber
Amber/Red
Red
SD card slot
NO
NOTICE
NO
TICE
TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card
from the product's webpage before removal.
This product supports microSD/microSDHC/microSDXC cards.
For SD card recommendations, see axis.com.
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are
trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.
Buttons
Control button
The control button is used for:
•
Resetting the product to factory default settings. See Reset to factory default settings on page 15.
WLAN pairing button
The WLAN pairing button is used for connecting to an access point through push button configuration (PBC). To find out more, go to .
Connectors
Network connector
RJ45 Ethernet connector.
Power connector
This microUSB type B connector is for power only. We recommend using Axis microUSB power supply.
Indication
Connection and normal operation.
Shows steady green for 10 seconds for normal operation after startup completed.
Steady during startup. Flashes during firmware upgrade or reset to factory default.
Flashes amber/red if network connection is unavailable or lost.
Firmware upgrade failure.
19