DieHard 200.71987 Manuel de l'opérateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} DieHard 200.71987. DieHard 200.71987 9 pages. Jump starter and dc power source
Également pour DieHard 200.71987 : Manuel de l'opérateur (9 pages)

Imprimer la page

3.1

3.2

3.3

3.4

Check t heinternal battery's charge l evel b ypressing theswitch marked

DISPLAY.

TheDigital Display wiltshow thebattery's percentage.

Charge i f

under 1 00%

NOTE: Internal battery's percentage

is most accurate when thePortable

Power 950hasbeen disconnected

from alldevices andcharging sources

for1-24hours.

Tocharge, plug the(external) wall c harger cord intothesocket onthe

back ofthe950. T hen, plug thewall c harger intoa 120VAC s ource.

CAUTION: Operating thePortable Power 950 while theinternal battery i s

being charged may cause permanent damage totheunit.

While the950ischarging, thebattery's percentage

ofcharge w ill b e

displayed. When theinternal battery i sfullycharged, thedisplay wiltshow

100. C omplete charging may take upto48hours. The 950isthen ready

touse.

Once thebattery i sfullycharged, theinternal charging circuitry automati-

cally switches tofloat-mode monitoring,

which keeps t hebattery fully

charged without overcharging.

Theinternal battery m ay also becharged while youdrive using themale-

to-male a ccessory cable (available separately,

see"Accessories

andRe-

placement Parts" section o fthismanual). Insert one endoftheaccessory

cable into the12V DCpower outlet a nd theother e ndintothevehicle's

accessory outlet ( lighter socket). Completely

disconnect theaccessory

cable when theengine i snotrunning.

Use inawell-ventilated

area. K eep hands, hair, c lothing a nd jewelry c lear

offanblades, belts, pulleys andother p arts thatmay cause i njury.

4.1 Turn ignition o ffbefore making c able connections.

4.2 Place t he950onaflat,stable s urface n ear t hevehicle b attery a ndaway

from moving e ngine p arts.

4.3 Connect theredclamp t othepositive ( +)terminal

d the vehicle battery.

4.4

NOTE: In the rare case of jump-starting

a vehicle that has a positive-

grounded vehicle electrical system, connect the black clamp to the

negative terminal of the vehicle battery. Then connect the red clamp to

an unpainted and unmoving part of the vehicle chassis or engine block. If

you are unsure of the nature of the vehicle's electrical grounding system,

check the owner's manual of the vehicle or call the Customer Technical

Assistance number: 1-800-SEARS-64.

Connect the black clamp to an unpainted and unmoving part of the vehicle

chassis or engine block. Do not connect to the carburetor, fuel lines or

sheet-metal body parts. The Digital Display displays the vehicle's voltage.

.3.