DieHard 200.71495 Manuel du propriétaire - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} DieHard 200.71495. DieHard 200.71495 10 pages. Converts 12v dc power to 110v ac household electrical power

Imprimer la page

TROUbLESHOOTING

REASON

Display shows SC. Device has a short

circuit or demands too much surge

power.

Display shows Lo b. 12 Volt battery is

too low.

Display shows Voltage in between

10.5 and 11.0 Volts.

Display shows Hi b. DC Voltage in is

too high.

Display shows HiP. Device demands

more than 750 Watts continuous

power.

Display shows HoT. Inverter is too hot. Increase ventilation to inverter.

PRObLEM: INVERTER DOES NOT TURN ON

REASON

Poor contact at terminals.

Fuse is blown.

Inverter may be defective.

PRObLEM: ALARM IS ON

SOLUTION

Cycle inverter power OFF and ON.

If problem persists, use a larger inverter

or a smaller device

Remove defective device.

Call 1-800-SEARS-64 (1-800-732-7764)

for troubleshooting assistance.

Recharge/replace low battery.

12 Volt battery is low.

Recharge/replace low battery.

Inverter will automatically shut off after

battery voltage reaches 10.5 volts.

If in a vehicle, repair/replace the alterna-

tor or charging system.

Use a properly sized and rated 12 Volt

battery.

If input voltage returns to 15 volts or less,

the inverter will automatically restart.

Cycle inverter power OFF and ON.

If problem persists, use a larger inverter

or a smaller device.

Move inverter to a cooler area.

Reduce the power consumption of the

device.

Inverter will automatically reset after

cooling.

SOLUTION

Unplug and reinsert Power Inverter 750.

A blown fuse is usually caused by re-

verse polarity or a short circuit within the

inverter. The fuse is not user replaceable.

Call 1-800-SEARS-64 (1-800-732-7764)

for troubleshooting assistance.

•