Axis Car Audio AX1502BT Manuel d'instruction - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Axis Car Audio AX1502BT. Axis Car Audio AX1502BT 16 pages. Bluetooth cd/mp3 multimedia player
Imprimer la page
General Operation
Power On/Off Button
Press the
/MUTE button to turn
when the vehicle ignition switch is
Adjust Volume level
Rotate
the
VOL
control
to
volume
level.
Rotate
clockwise
increase and anticlockwise to decrease the
volume.
Audio Mute
Press the /MUTE button to mute the volume
from the system. "MUTE" will appear on the
display and the volume will be muted.
Press the
/MUTE button again to return
the volume level to the setting in use before
the Mute function was activated.
Audio Controls
To adjust the balance and fader, press
the VOL control until the appropriate audio
control appears on the display panel.
Within five seconds, rotate the VOL control
to adjust the audio settings for the selected
function.
Mode Button (SRC)
Press the SRC button to change between
Radio, DISC (when disc is in), USB (when
USB is connected), Card(when SD/MMC card
is in), A2DP(when BT is connected) or AUX
play, etc.
the unit
.
Auxiliary Input
To access an auxiliary device:
1.
Connect the portable audio player to the
AUX interface on the front panel.
2.
Press the SRC button to select Aux-In
adjust
mode.
to
Press SRC again to cancel Aux-In mode and
go to the next mode.
The front AUX IN and rear AUX IN can
use
Setting the Clock
The correct time of day can be set by pressing
and holding the DISP button.
To set the clock:
1.
Turn the vehicle ignition and radio on.
2.
Press the DISP button to view the clock.
3.
With the clock visible on the display,
press and hold the DISP button until the
4.
Within 5 seconds, rotate the VOL control
counter clockwise to adjust the minutes
to the desired setting. To change the
hour, rotate the VOL control clockwise to
adjust the hour to the desired time.
SOUND SETTING
effect mode. Rotate the knob to change
BEAT EQ in this order:
DSP OFF -> POP -> CLASSIC -> ROCK ->
JAZZ
Press the [ VOL ] button, to select USER
preset including:
BALANCE -> FADER , rotate the knob to
select a value.
BALANCE:LEFT 1-7->CENTR ->RIGHT 1-7
be
FADER:FRONT 1-7->CENTR ->REAR 1-7
3
the [ VOL ] button to enter sound