Axis Industries QALCOMATIC FLOW C Description technique, installation et manuel d'utilisation - Page 5

Parcourez en ligne ou téléchargez le pdf Description technique, installation et manuel d'utilisation pour {nom_de_la_catégorie} Axis Industries QALCOMATIC FLOW C. Axis Industries QALCOMATIC FLOW C 8 pages. Water meters

Imprimer la page

The meter comprises the flowrate measuring device (sensor) installed inside the frame and the

electronic indication device (counter).

The flowrate sensor is mounted in the pipeline. The frame is made of nickel plated brass that has a

measuring chamber with a single-jet impeller on the inside. The inlet is provided with the grids/filters, which

protect the meter from large impurities found in the pipeline.

The counter comprises an electronic block with an 8-digit display (LCD). The operating voltage is

supplied from the internal 3.6 V lithium battery. The front panel features the optical interface (IR) for remote

data reading. The counter can be rotated at up to 360 degrees in respect of the frame.

Water meter QALCOMATIC FLOW C or QALCOMATIC FLOW H

Technical description. Installation and operation guide.

Installation accessories, kit:

connection nozzles (external thread ½, connection nut ¾ )

* Included in the kit according to special request of clients

5.1.

The meter must be installed in an easily accessible place (to facilitate meter reading and

maintenance).

5.2. First, it is necessary to close the valve and empty the water in the pipe.

5.3. Both horizontal and vertical installation is possible. In any event, it is necessary to ensure

convenient reading of the data. The meter must be installed into the system in such a way that the

direction arrow on the frame matches the direction of the water flow.

5.4. The labelled flowrate ratio R with marking H corresponds to the horizontal installation position, when

the meter indicator is positioned in the horizontal plane, while the indicated flowrate ratio R with marking V

corresponds to the vertical installation position, when the meter indicator is not positioned horizontally.

5.5. Straight parts in front and in the back of the meter are not mandatory. Use only original inserts for

proper sealing.

6. OPERATION AND TECHNICAL MAINTENANCE

1. The quality of water greatly affects the service life of the meter. Mechanical additives, rust and other

impurities reduce durability of the meter.

2. Attention! Protect the meter against freezing. Damage caused by freezing is unrepairable.

3. Operation procedure

Indicated parameters (segments marked in grey are individual and must be connected separately using

AXIS-EVS parameter setting tools):

PLMATICF01

31/05/2016

3. STRUCTURE

4. KIT

5. INSTALLATION PROCEDURE

Quantity, units