Olympus DP26 Manuel d'instructions - Page 17

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Olympus DP26. Olympus DP26 36 pages. Microscope digital camera
Également pour Olympus DP26 : Manuel d'instructions (36 pages)

Imprimer la page

Fig. 4

Fig. 5

Connecting the AC adapter (necessary only when a

laptop PC is connected)

• Always use the AC adapter provided by Olympus.

Using an other AC adapter will result in malfunction or

damage.

• The cords and cables are vulnerable to bend or twist.

Do not apply excessive force to them.

1. Insert the output connector 1 of the AC adapter into the DC

input connector 2 of the camera head.

2. Insert the connector 3 of the power cord into the input

connector 4 of the AC adapter.

• Always use the power cord provided by Olympus. If no

power cord is provided with the camera head, please

select a proper power cord by referring to chapter

"PROPER SELECTION OF THE POWER CORD" at the

end of this instruction manual (page 26).

3. Insert the power cord plug into the power outlet. Connect

the power cord correctly and ensure that the grounding

terminals of the power supply and wall outlet are properly

connected.

• If the equipment is not grounded properly, Olympus

can no longer warrant the electrical safety

performance of the equipment.

}The AC adapter generates heat after long hours of use, but

this is not malfunction.

}The AC adapter of the camera is required only when it is

connected to a laptop PC. It is not necessary when it is

connected to a desktop PC or controller.

DP26