AXITEC AXIbox 11K Manuel d'installation et d'utilisation - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} AXITEC AXIbox 11K. AXITEC AXIbox 11K 13 pages.
Imprimer la page
1 Target group of this document
This document refers to the assembly, installation and operation of the AXIbox 11K charging station and is
intended for the installer and the users. Chapters 5-7 are intended exclusively for the charging station
installer with the appropriate qualification.
2 General regulations and safety measures
The input and output voltages of this unit are dangerous
high voltages that can endanger human life. Please be sure
to observe all warnings and operating instructions on the
unit and in the manual. Unauthorised and unprofessional
service personnel should not remove the cover of this unit.
Installation must be carried out by a qualified electrician who is familiar with the contents of the
installation instructions and knows about and can apply the applicable standards and laws. National and
regional regulations must be observed for assembly and installation.
Read these installation instructions before installation.
Read these operating instructions before operating the AXIbox 11K and ensure that this charging station is
only operated by persons who have read these instructions. Keep these instructions in a safe place.
Non-observance of these instructions as well as non-intended use of the charging station can lead to
injuries or even death as well as damage to property.
Persons with pacemakers should not carry out any installation or maintenance work on the AXIbox.
Do not operate the charging system near explosive or flammable materials, chemicals, vapours and other
hazardous objects.
Do not clean the vehicle with a pressure washer while the charging cable is connected.
Do not disconnect the charging station from the vehicle during charging.
Check the charging system for damage to the housing, cable or plug before use. A damaged wallbox must
not be put into operation.
Do not immerse the wallbox and the charging plug in water and protect the connections from moisture.
Keep the charging socket dry and clean.
When operating the charging coupler, always grasp the handle of the plug. Do not touch the contacts of the
plug or hold it by the cable.
As a user, do not open the housing of the wallbox.
No modifications or conversions may be carried out on the charging station.
No adapters or cable extensions may be used.
EN211103
Installationsanleitung AXIbox 11K
3