Olympus VP-10 Manuel de base - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de base pour {nom_de_la_catégorie} Olympus VP-10. Olympus VP-10 13 pages.

Imprimer la page

Specifications

•

Recording formats

Linear PCM (pulse-code

modulation) format

MP3 (MPEG-1 Audio Layer 3) format

WMA (Windows Media Audio)

format

•

Maximum working output

90 mW (8 0 speaker)

•

Maximum headphone output

::;;; 150 mV (conforms to EN 50332-2)

•

Recording media*

Internal NAND flash memory: 4GB

Some memory capacity is used

as a management area, so the

actual usable capacity will

always be slightly less than the

displayed capacity.

•

Speaker

Built-in 10 mm diameter round

dynamic speaker

•

Earphone jack

3.5 mm diameter; Impedance:

80 minimum

•

Power source

Standard voltage: 1.5 V

Battery: One AAA dry cell

battery (model LR03), or one

Olympus nickel-metal hydride

rechargeable battery

•

External dimensions

17 x 130 x 17 mm (Not including

largest projection)

•

Weight

37.5 g (including battery)

•

Operating temperature

to 42°C (32 to 1 07.6oF)

Note that voice recorder

specifications and appearance

are subject to change without

prior notice for performance

improvements or other

upgrading.

FCC Notice

• This equipment has been tested

and found to comply with the

limits for a Class B digital device,

pursuantto Part 15 of the FCC

Rules. These limits are designed

to provide reasonable protection

against harmful interference in a

residential installation.

• This equipment generates, uses,

and can radiate radio frequency

energy and, if not installed

and used in accordance with

the instructions, may cause

harmful interference to radio

communications.

• However, there is no guarantee

that interference will not occur

in a particular installation. If

this equipment does cause

harmful interference to radio or

television reception, which can

be determined by turning the

equipment off and on, the user is

encouraged to try to correct the

interference by one or more of the

following measures:

- Reorient or relocate the

receiving antenna.

- Increase the separation between

the equipment and receiver.

- Connect the equipment into

an outlet on a circuit different

from that to which the receiver is

connected.

- Consult the dealer or an

experienced radio/TV technician

for help.

- Only the OLYMPUS-supplied USB

cable should be used to connect

the equipment to USB enabled

personal computers (PC).

Any unauthorized changes or

modifications to this equipment

would void the user's authority to

operate.

For customers in USA

Declaration of Conformity

Model Number: VP-1 0

Trade Name: OLYMPUS

Responsible Party: OLYMPUS

AMERICA INC.

Address: 33500 Corporate Parkway,

P.O. Box 610, Center Valley, PA 18034-

0610, U.S.A.

Telephone Number: 1-888-553-

4448

Tested To Comply With FCC

Standards

FOR HOME OR OFFICE USE

This device complies with Part 15 of

the FCC rules. Operation is subject to

the following two conditions:

(1) This device may not cause

harmful interference, and

(2) this device must accept any

interference received, including

interference that may cause

undesired operation.

For customers in CANADA

CAN ICES-3 (B)/NMB-3 (B)