AXIWI AT-320 Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AXIWI AT-320. AXIWI AT-320 2 pages. 6 persons two-way (duplex) communication
Également pour AXIWI AT-320 : Manuel de l'utilisateur (16 pages), Manuel de l'utilisateur (16 pages)

Imprimer la page

With the AXIWI communication system, you have to setup 1 unit as a 'Master'. The other units

have to be set up as a 'Submaster' or a 'Follower', depending if you want to be able to talk

continuously or incidentally. In the 'Submaster' mode your speaking function is always activated.

In the 'Follower' mode you have to manually activate and deactivate your speaking function. 

In order to set up the AXIWI you have

to make the following installation steps.

Set up as Master

1.Push and hold the volume + button.

2.Then push the 'on/off' button (at least 2

seconds) while pushing the volume + button

at the same time. The colour of the LED-light

indicates the channel.

3.The AXIWI unit is set up in the 'Master'

mode. The LED-light will light up constantly.

Set up as Submaster

1.Push and hold the volume - button.

2.Then push the 'on/off' button (at least 2

seconds) while pushing the volume - button

at the same time.

3.The AXIWI unit is set up as 'Submaster'. The

LED-light of the chosen channel will flash

quickly (quicker than in the 'Follower' mode)

and the other LED-lights will light up

constantly.

3. Channel LED

5. Multi-functional

'S' button

Set up as Follower

1.Push the 'on /off' button (at least 2 seconds).

The LED-light of the chosen channel will

flash. The AXIWI is set up as 'Follower'.

2.With the 'S' button on the front, the speaking

function can be activated and deactivated.

Press the 'S' button briefly to activate (and

again) to deactivate the speaking function.

3.When the speaking function is activated, the

LED-light of the chosen channel will flash,

the other LED-lights will light up constantly.

Change the channel

1.Push the volume up + button and hold it.

2.Push the 'S' button briefly at the same time.

Each time you push the 'S' button, the

LED-light will change to the next colour; the

next channel. When you have selected the

right/correct channel, release

the volume + button.

6. Volume -

7. On/off button

1. Headset port

2. USB-port

4. Volume +