Olympus BX43 Manuel d'instructions - Page 27

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Olympus BX43. Olympus BX43 48 pages. System microscope

Imprimer la page

5° to 35°

Fig. 35

Fig. 36

Fig. 37

Fig. 38

Adjusting the Tilt

With the U-TBI-3 (Fig. 35)

} Adjust the height and tilt of the observation tube to obtain the most

comfortable viewing position.

Holding the binocular section @ with both hands, raise or lower it to the

desired position.

CAUTION

} The U-TBI-3/U-TBI-3-CLT can be used in combination with only one

intermediate attachment.

} If you need photography using the U-TBI-3/U-TBI-3-CLT, use the U-TRU

trinocular tube.

With the U-ETBI/U-TTBI (Fig. 36)

The U-ETBI and U-TTBI are ergonomic observation tubes with normal

field, capable of the adjustments of the positioning angle (0° to 25°) as

well as front-rear positioning (by 45 mm) of the eyepieces. The U-ETBI is

the erect image model and the U-TTBI is the inverted image model, and

both models are of the same size.

CAUTION

With the U-TTLBI (Fig. 37)

The U-TTLBI is a Tilting, Telescopic, Lifting binocular tube with the following

adjustment capabilities.

· Eyepiece angle adjustment (0° to 27°)

· Eyepiece up-down position adjustment (45 mm)

· Observation tube front-rear position adjustment (55 mm)

} When adjusting the front-rear position of the observation tube, hold the

base of the observation tube as shown in Fig. 38.

} When storing the microscope, increase the angle of the eyepieces so as

to prevent the eyepieces from dropping.

} To adjust the up-down position of the eyepiece, turn the dial 2.

U-TBI-3

U-TBI-3-CLT

U-ETBI

U-TTBI

U-TTR2

U-TTLBI

Never attempt to force the binocular section past the upper or

lower stop position. Applying excessive force could destroy the

limiting mechanism.

The intermediate attachments that can be combined with the

U-TTBI are limited. For details, please contact Olympus.

BX43

(Figs. 35 to 38)

5° to 35°

0° to 25°

5° to 35°

0° to 27°