Olympus BX51 Manuel d'instructions - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Olympus BX51. Olympus BX51 40 pages. System
Également pour Olympus BX51 : Manuel d'utilisation (17 pages), Manuel d'instructions (34 pages), Manuel d'instructions (37 pages), Manuel d'utilisation (11 pages)

Safety Symbols

The following symbols are found on the microscope. Study the meaning of the symbols and always use the equipment

in the safest possible manner.

Symbol

Warnings

Warning engraving is placed at parts where special precaution is required when handling and using the microscope.

Always heed the warnings.

Getting Ready

Fig. 2

Indicates that the surface becomes hot, and should not be touched with bare hands.

Before use, carefully read the instruction manual. Improper use could result in personal injury to

the user and/or damage to the equipment.

Indicates that the main switch is ON.

Indicates that the main switch is OFF.

Warning engraving

position

1. A microscope is a precision instrument. Handle it with care and avoid

subjecting it to sudden or severe impact.

2. Do not use the microscope where it is subjected to direct sunlight, high

temperature and humidity, dust or vibrations. (For the operating condi-

tions, refer to section 5, "SPECIFICATIONS".)

3. When moving the microscope, remove the specimen and modules that

may drop during transport and carefully carry it with the grasping part

on the rear of the arm and the base as shown in Fig. 2 (Weight: approx.

16 kg).

# Before transporting the microscope, be sure to remove the speci-

men, eyepieces and color glass filter so that they will not drop. Also

remove other modules attached to the microscope because they

increase the system weight.

# Damage to the microscope will occur if you grasp it by the stage,

coarse/fine adjustment knob or binocular section of the observa-

tion tube.

4. The BX51 series can be used with up to two intermediate attachments

(e.g. a U-CA magnification changer, U-EPA2 eyepoint adjuster, etc.). For

restrictions when using two intermediate attachments, make sure to read

the instruction manual provided with the respective intermediate attach-

ments.

# The microscope may become unstable when its height is increased

by mounting certain modules on it. In such a circumstance, take

measures to prevent the microscope from toppling down and

dropping the specimen.

Explanation

Lamp housing

(Warning against high temperature)