Olympus BX52-P Manuel d'instructions - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Olympus BX52-P. Olympus BX52-P 36 pages. Polarizing microscope
Également pour Olympus BX52-P : Manuel d'instructions (34 pages)

Imprimer la page

Fig. 20

†

Fig. 21

...

4. Slightly loosen the intermediate adapter clamping screw ƒ. (Fig. 20)

5. While observing the field of view, rotate the intermediate attachment for

AN360P (U-OPA) | until complete extinction is obtained. At this point,

tighten the intermediate attachment clamping screw ƒ. (Fig. 20)

6. Remove the provided alignment polarizer.

7. Attach the condenser.

8. Center the condenser. (Refer to page 18 in the BX51/52 instruction

manual or page 16 in the BX41 instruction manual.)

9. Centering the rotatable stage (Figs. 21 & 22)

(1) Place the specimen.

(2) Focus on the specimen and look for an easily recognizable detail ...

in the field. Move this detail in the center of the eyepiece cross lines.

(3) When the stage is rotated, the detail moves in circle †. Manipulate

the two stage centering knobs ‡ to coincide the imaginary center of

the circle † circumscribed by the detail with the intersection of the

eyepiece cross lines.

(4) Moving the specimen only, move a new specimen detail into the

cross line center.

}Repeat steps (3) and (4) several times until the center of the stage

rotation is in the center of the cross lines, i.e., when rotating the stage,

the specimen stays in the center of the cross lines.