Olympus BX53M-P Manuel d'instructions - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Olympus BX53M-P. Olympus BX53M-P 36 pages. Polarizing microscope

Imprimer la page

Fig. 9

Fig. 10

Mounting Rotatable Analyzer (U-AN360P)

1. Place a desired ND filter (30 mm diam.) in the empty hole @ as required.

2. Insert the rotatable analyzer (U-AN360P) ² as far as the click-stop position.

Then screw in the stopper knob ³. (Fig. 10)

When using the fixed analyzer U-ANT instead of the rotatable analyzer

U-AN360P, place the fixed analyzer in the test plate adapter U-TAD.

Position the fixed analyzer so that the positioning pin on the fixed analyzer

fits into the groove. The fixed analyzer will be held in place by a magnet.

Mounting Test Plate Compensator

1. Loosen the test plate adapter (U-TAD) clamping knob @.

2. Insert the sensitive tint plate (U-TP530), quarter wave plate (U-TP137), or

any of the other compensators (6 types) into the test plate adapter, and

securely tighten the clamping knob.

(Fig. 9)

(Fig. 10)