Olympus CHD Manuel d'instructions - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Olympus CHD. Olympus CHD 17 pages. Biological microscope
Également pour Olympus CHD : Manuel d'instructions (16 pages)
Imprimer la pageII
Insertion of the blue filter
Slip the blue filter (32.5mm dia.)
®
into the filter holder
CD.
(Fig.
6)
II
Insertion of the filter holder
Insert the filter holder
m
into the condenser from below. (Fig. 6)
5
Fig. 6
...
Mounting the mirror
1) Insert the mirror
C:D
fork into the mirror mounting seat
®
in the
base.
2) If the mirror fork is loose, pullout the mirror fork, and adjust the
slit in the fork with a screwdriver.
Fig.7
o
B S E RVATION
(Putting the Microscope in Operation)
o
OJ
(Il
m
:Xl
<
»
-I
(5
Z
Fig. 8
D
Specimen Placement
1) Open the spring-loaded specimen finger
CD,
and slide the specimen
slide into the holder, with the cover glass upward.
Push the slide all the way against the holder and release the finger
CD
slowly. (Fig. 8)
*
A sudden release of the finger may cause damage to the slide or
the holder.
2) For use of the stage clips in place of the specimen holder, insert a pair
of stage clips into the holes on the drilled surface of the stage and
insert the specimen slide between each clip and the stage surface.
• Use of a cover glass
Use a cover glass of 0.17mm thick in conjunction with the objectives marked with the inscription "160/
0.17" for optimum performance of these objectives .
• Use of a specimen slide
The thickness of a specimen slide between 0.9 mm and 1.2 mm is recommended for the CHD. If the thick-
ness of a slide exceeds this range, illumination may sometimes be impaired.
- - - - - - - - - - - - - - - - - - - - - - - - - - - B