Olympus CHT Manuel d'instructions - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Olympus CHT. Olympus CHT 24 pages. Biological microscopes
Également pour Olympus CHT : Manuel d'utilisation (23 pages)
![Olympus CHT Manuel d'instructions](/uploads/products/server2/4282588/4282588.png)
•
• F use replacement
1)
The fuse box
(I;:
is located at the back of the microscope base.
([=
ig. 13)
2}
Disconnect the power cord from the AC outlet. and remove the fuse
box
ct
from the base by means of
a
screw driver. (Fig. 13)
*
Apply the tip of the screw driver at the lower edge of the fuse
box to remove it.
*
The fuse box can accommodate a spare fuse in it.
Use a fuse as designated by the manufacturer:
ivlicroscope
Fuse arn per age
Fig.
13
100V
1A
CHS
200V 0.63A
CHT
100V
0.8/-\
200V O.63A
z
o
~
~
a:
w
V)
en
o
5
-
-
OBSERVATIO
N -
~P~t1ing t~el~i~r~5~t?P~ j~ ~PlJra~ion'
.
D
Switchin~
on the
bulb
I) Turn the power 'switch
j ;
ON and adjust the voltage control dial
(~;
until
ropa! i!\ mity is
obt~i
ed. (Fig. 1r.)
2) Rotdte the dial
(2;
toward
r
e
operator (clockwise)
to
darken inten·
sity (in tile direction of tne arroWl, or reverse the dli:ll (counterc]ock·
'Nlse)
to brigh ten
Fig.
14
Fig. 15
fJ
Specimen placement
1} Open the spring-loaded finger
cD
of lhe specimen holder with one
hand, and insert the specimen slide with the cover glass above the
specimen into the holder INith the other hand. (Fig. 15)
*
Be careful to release the finger
CD
gently after the specimen is
placed inside the holder.
*
A sudden release of the finger may cause damage to the slide. If
fragments of the specimen slide fall on the sliding surfaces of the
stage or condenser, malfunctions may result.
2)
For use of the stage clips in place of the specimen holder, attach a
pair of stage clips on the stage, and insert the specimen slide between
lhe stage surface and the clips near the clip stems; then move the
slide toward the stage center.
1 1 - - - - - - - - - - - - - - - - - - - - - - - - - - -