Olympus CK40 Manuel d'instructions - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Olympus CK40. Olympus CK40 39 pages. Culture microscope

Maintenance and Storage

1. Clean all glass components by wiping gently with gauze. To remove fingerprints or oil smudges, wipe with gauze slightly

moistened with a mixture of ether (70%) and alcohol (30%).

# Do not use a mixture of ether (70%) and alcohol (30%) to clean the lower lens (made of optical plastic) of the

eyepiece (NCWHK10X) because such solvents cloud the lens. If dust adheres to the lens, blow it off or wipe it away

gently with a dry cloth.

Since solvents such as ether and alcohol are highly flammable, they must be handled carefully. Be sure to keep

these chemicals away from open flames or potential sources of electrical sparks —— for example, electrical

equipment that is being switched on or off. Also remember to always use these chemicals only in a well-

ventilated room.

2. Many parts of the exterior are made of plastic. Wipe the unit with a clean cloth only. Do not use organic solvents to clean

non-optical components. If smudges are difficult to remove, wipe them with a soft cloth slightly moistened with a diluted

neutral detergent.

3. Be careful not to spill any liquid – – such as a culture solution – – on the unit. If you do spill anything, immediately set the

main switch to " " (OFF) and unplug the power cord. Then wipe away any liquid on the objectives or under the objectives.

4. If no objectives are mounted, be sure to cover the objective mounting threaded holes on the revolving nosepiece to

prevent dust and spilled culture solution from getting on the lenses inside.

5. Never disassemble any part of the unit. Doing so could cause malfunctions or reduced performance.

6. When the unit is not in use, keep it covered with a dust cover. Make sure the lamp socket is cool before covering the unit.

7. Using a device that radiates ultraviolet light such as a germicidal lamp near the unit may discolor (yellow) parts of the

unit´s surface. The amount of discoloration depends on the radiation intensity of the ultraviolet light and the distance

between the unit and radiation source. When not using the unit, cover it with the dust cover. We recommend that you also

cover the unit with an impermeable sheet.

Caution

If the equipment is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition, the

equipment may also be damaged. Always use the equipment as outlined in this instruction manual.

The following symbols are used to set off text in this instruction manual.

: Indicates that failure to follow the instructions in the warning could result in bodily harm to the

user and/or damage to equipment (including objects in the vicinity of the equipment).

# : Indicates that failure to follow the instructions could result in damage to equipment.

} : Indicates commentary (for ease of operation and maintenance).

iii