Olympus CKX41 Manuel d'instructions - Page 27

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Olympus CKX41. Olympus CKX41 36 pages. Reflected fluorescence system
Également pour Olympus CKX41 : Vue d'ensemble (7 pages), Brochure & Specs (4 pages), Manuel de réparation (43 pages)

Imprimer la page

Fig. 15

Fig. 16

Attaching the Excitation Light Protective Shield

}The mounting holes for the excitation light protective shield

have a large size because they are also used with the

CKX-RCD condenser.

Insert the excitation light protective shield 1 from the bottom

of the condenser 2, and then tighten the two clamping

screws 3.

Attaching the U-LH50HG Lamp Housing

Insert the collector 1 of the lamp housing into the illuminator,

rotate the lamp housing so that its top panel 2 becomes

horizontal, then tighten the two clamping screws 3 on the

illuminator using the Allen wrench.

As the lamp housing surface becomes very hot during

operation, ensure that there is ample free space around

the lamp housing, especially above and below.

If the lamp socket cord 4 or power cord 5 of the CKX41

comes in contact with the lamp housing or its surround-

ings, the cord could melt and cause electric shock. Be

sure to position these cords at safe distances from the

lamp housing.

REFLECTED FLUORESCENCE SYSTEM

FOR CKX41

(Fig. 15)

(Fig. 16)