Olympus CX23 Manuel d'instructions - Page 26
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Olympus CX23. Olympus CX23 32 pages. Biological microscope
2
Eyepieces WHSZ15X-H
a
3
Mounting the eyepiece micrometer (optional)
22
} The standard 10X eyepieces are clamped using screws.
1
Using a small flat-blade screwdriver, loosen the clamping screws a of
10X eyepieces and remove eyepieces.
2
Insert the WHSZ15 X-H into the eyepiece sleeves and tighten the
clamping screws a .
} If you are using 10 X eyepiece, please purchase the eyepiece
micrometer with diameter 24 mm diameter and 1.5 mm thickness.
b
1
Loosen the clamping screw of the eyepiece with the small-size flat-
blade screwdriver, and remove the right eyepiece to which the eyepiece
micrometer will be attached.
Hold the eyepiece frame and loosen the reticle holder a to remove it.
2
Place the micrometer disk a into the reticle holder b with the
3
a
indications facing down.
Be careful not to leave dirt on the micrometer disk, as it
CAUTION
will be noticeable during observation.
3
Screw the reticle holder b containing the micrometer disk a into
the bottom of an eyepiece. Be sure to screw in all the way by hooking
your nail into the notch c on the holder at the end.
Screw the reticle holder a containing the micrometer b into the
4
bottom of an eyepiece. Screw in the reticle holder a
until it touches the end.
5
Attach the eyepieces to the observation tube, and tighten the clamping
screws.
completely