Olympus DP26 Manuel d'instructions - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Olympus DP26. Olympus DP26 36 pages. Microscope digital camera
Également pour Olympus DP26 : Manuel d'instructions (36 pages)

Imprimer la page

IMPORTANT

The DP26 microscope digital camera is designed to be connected to a camera adapter mounted on an

Olympus UIS2/UIS series microscope for recording of microscopic magnified images.

When the DP26 is used with a camera adapter from other manufacturers than Olympus, the optical

performance may not be fully manifested.

Safety Precautions

1. Before connecting or disconnecting a connection cable or power cord, make sure that the main switch

of the camera or PC is set to OFF. When connecting a cable or power cord, push in the connector all the

way before pressing the main switch to ON.

2. To avoid electric shock or equipment failure, never connect or disconnect a cable while the main switch

is set to ON.

3. If the main switch of the camera is turned OFF using DP26, PC the application may malfunction. Be

sure not to turn OFF the switch during using DP26.

4. Always use the AC adapter provided by Olympus.

Using a similar but non-Olympus AC adapter does not only allow the camera to manifest its full

performance but may also cause an equipment failure as well as a burn or fire hazard due to abnormal

heating. Never use such an AC adapter.

5. The cords and cables are vulnerable to bend or twist. Do not apply excessive force to them.

Also distribute the cords and cables away from a heat-generating part such as the lamp housing of the

microscope.