Olympus DP26 Manuel d'instructions - Page 24
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Olympus DP26. Olympus DP26 36 pages. Microscope digital camera
Également pour Olympus DP26 : Manuel d'instructions (36 pages)
4
IMAGE RECORDING PROCEDURE
4-1 Software
• When DP2-TWAIN or cellSens / OLYMPUS Stream is installed, the 1394 driver is also replaced with the dedi-
cated driver for the DP26. When this driver is installed, other 1394 devices except Olympus Digital Camera
for Microscope cannot be operated though connected. (Note that DP25 cannot be used.)
• If you want to use an IEEE 1394 device other than the DP26, open the Device Manager and update the
driver software of "OLYMPUS(R) MICROSCOPE 1394 DIGITAL CAMERA SYSTEM" under "1394 Bus Host
Controllers".
Before Installation
1) Quit all running applications before installing software.
2) The software cannot be installed unless the user account is registered as "computer administrator." If the user
account is registered as a "Restricted account," change it to the "Computer administrator" account.
(For the user account registration, refer to the instruction manuals for your computer.)
3) When using a 1394PCIe board, install it in the PC before installing software.
TWAIN Driver DP2-TWAIN
DP2-TWAIN is not included in this product. Download the installer from the following URL prior to use. For installation
procedures, refer to the following URL.
[DP2-TWAIN Download Site]
· For Life Science
http://microscope.olympus-global.com/en/ga/support/software/
· For Industrial Solutions
http://www.olympus-ims.com/en/service-and-support/downloads/
21