Olympus Fluoview FV1000 Instructions abrégées - Page 4

Parcourez en ligne ou téléchargez le pdf Instructions abrégées pour {nom_de_la_catégorie} Olympus Fluoview FV1000. Olympus Fluoview FV1000 7 pages. Confocal microscope
Également pour Olympus Fluoview FV1000 : Vue d'ensemble (28 pages), Manuel de l'utilisateur (42 pages), Instructions abrégées (7 pages), Manuel de l'utilisateur (9 pages), Manuallines (3 pages)

Olympus FV1000

5. Changing objectives:

Never change the objectives manually!

To change objectives use the microscope control menu within the Olympus

software or the panel box left of the microscope stand.

6. Changing the specimen:

Before you change the specimen, drive down the objective nosepiece.

Don't forget to remove the old oil from the objective before you add new ones.

7. Lasers:

Lasers for the lines 491, 532, and 559 nm have to be switched on manually. Read

chapter 3 for details.

8. Data transfer:

There are three ways to transfer your data from the microscope computer:

a. Transfer through the MHH network. First, create a shared folder on the

computer which should receive the data. At the microscope computer, search

for the receiving computer using the IP number. Make an alias on the desktop

for future usage.

b. USB-sticks or movable hard disks connected via USB. The USB sockets are

located at the front of the computer.

c. Writable DVDs. Open the Nero software and follow the instructions.

-4-

Short instructions