Olympus U-D7RES Manuel d'instructions - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Olympus U-D7RES. Olympus U-D7RES 16 pages. Coded 7 position nosepiece / coded 6 position nosepiece
Également pour Olympus U-D7RES : Manuel d'instructions (16 pages), Instructions (2 pages)

Imprimer la page

Fig. 3

Attaching the U-HSEXP (Fig. 3)

} The U-HSEXP is composed of the U-HSEXP switch (fixed by magnet) and

circular iron plates (adhesive). Two circular plates are provided, with one of

them intended for use as the spare.

1. Attach the switch @ on the center of the circular plate 2 by means of

magnet.

Do not remove the backing sheet of the circular plate until the final fixing

position is decided.

2. Decide the final fixing position that is most convenient for controlling the

switch from the area 3 (indicated by

adjustment knob on the left or right.

3. Clean the final fixing position with absolute alcohol, remove the backing

sheet from the round plate and apply it securely on the final fixing positi-

on.

CAUTION

If there is an article with magnetic field near the U-HSEXP, equip-

ment failure or malfunction may result. So do not let such an

article as listed below come close to the U-HSEXP.

· PC

· Mobile phone

· Clock/watch

· Credit card

· Bank card

· Floppy disk, etc.

} Unless the U-D7RES is connected to the U-CBS, the U-HSEXP does not

function. So be careful.

in the figure) near the coarse