Olympus U-MDO10R3 Manuel d'instructions - Page 36

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Olympus U-MDO10R3. Olympus U-MDO10R3 40 pages. For 2, 5, 9, 10 and 13 persons

Imprimer la page

Proper selection of the power supply cord

If no power supply cord is provided, please select the proper power supply cord for the equipment by referring to

"Specifications" and "Certified Cord" below:

Caution : In case you use a non-approved power supply cord for Olympus products, Olympus can no longer

warrant the electrical safety of the equipment.

Voltage rating

Current rating

Temperature rating

Length

Fittings configuration

A power supply cord should be certified by one of the agencies listed in Table 1 , or comprised of cordage marked with

an agency marking per Table 1 or marked per Table 2. The fittings are to be marked with at least one of the agencies

listed in Table 1. In case you are unable to buy locally the power supply cord which is approved by one of the agencies

mentioned in Table 1, please use replacements approved by any other equivalent and authorized agencies in your

country.

Country

Argentina

Australia

Austria

Belgium

Canada

Denmark

Finland

France

Germany

Ireland

125 V AC (for 100-120 V AC area) or, 250 V AC (for 220-240 V AC area)

6 A minimum

60 ˚C minimum

3.05 m maximum

Grounding type attachment plug cap. Opposite terminates in molded-on IEC

configuration appliance coupling.

Table 1 Certified cord

Certification mark

Agency

IRAM

SAA

ÖVE

CEBEC

CSA

DEMKO

FEI

UTE

VDE

NSAI

Specifications

Country

Italy

Japan

Netherlands

Norway

Spain

Sweden

Switzerland

United

Kingdom

U.S.A.

Agency

Certification mark

IMQ

JET, JQA,

KEMA

NEMKO

AEE

SEMKO

SEV

ASTA

BSI