Olympus U-RFL-T Manuel d'instructions - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Olympus U-RFL-T. Olympus U-RFL-T 16 pages.
Également pour Olympus U-RFL-T : Manuel d'instructions (36 pages), Manuel d'instruction (16 pages)

Imprimer la page

Getting Ready

1. This manual pertains only to the handling of the power supply. For other information, please refer to the instruction

manuals for the lamp housing and microscope used in combination with the power supply so that you can understand

the comprehensive operating procedures of the system.

2. Do not use the unit where it is subjected to direct sunlight, high temperature and humidity, dust or vibrations. (For the

operating conditions, refer to chapter 4, "SPECIFICATIONS" on page 7.)

3. Turning the burner on/off frequently shortens its service life considerably. When you are going to interrupt observation for

a short period of time, it is recommended to leave the burner on and screen the light with the shutter, etc.

4. The power cord is also used to shut off the power supply in case of an emergency. Install the power supply so that the

power cord connector or the wall power outlet is easily accessible from the operator.

Maintenance and Storage

1. If any part of the equipment gets dirty, with it with a clean cloth.

If the part is extremely dirty, do not attempt to use organic solvents to clean it; instead, use a soft, lint-free cloth slightly

moistened with a diluted neutral detergent.

2. When disposing of the power supply. Check the regulations and rules of your local government and be sure to observe

them.

If you cannot dispose of a used mercury burner yourself, please contact Olympus.

Caution

If the power supply is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition,

the equipment may also be damaged. Always use the equipment as outlined in this instruction manual.

The following symbols are used to set off text in this instruction manual.

: Indicates that failure to follow the instructions in the warning could result in bodily harm to the

user and/or damage to equipment (including objects in the vicinity of the equipment).

# : Indicates that failure to follow the instructions could result in damage to equipment.

} : Indicates commentary (for ease of operation and maintenance).

U-RFL-T/U-RX-T