Olympus PT-032 Manuel d'instruction - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Olympus PT-032. Olympus PT-032 44 pages. For the digital camera stylus 710/700, µ 710/700
Imprimer la page
Prepare the camera.
Applicable Digital Cameras
This product (PT-032) is designed exclusively for use with the Stylus
710/700 and µ710/700 digital cameras.
Turn the digital camera ON.
The digital camera can be switched ON by pressing the camera's
POWER button once. Pressing the button again turns the camera
OFF.
If the digital camera is not operated for about 3 minutes with the
power ON, it automatically enters the standby status. Normal
operation is resumed as soon as a control such as the zoom button
is used.
If no operations are carried out for 15 minutes, the camera
automatically switches OFF to prevent battery power consumption.
In this case, the POWER button must be pressed to turn the
camera ON again.
Check the camera's operation.
Check if the camera functions normally as described in its
instruction manual.
After checking, press the camera's POWER button to turn it OFF.
Open the Case.
Use the provided O-ring remover as described below.
Insert the hook section below the buckle lock/unlock lever.
Slowly pull the O-ring remover.
If the O-ring remover is not available, push the buckle lock/unlock
lever from the left and right with your thumb and index finger, and
pull up the lever gently.
E-15