Olympus PT-037 Manuel d'instruction - Page 41

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Olympus PT-037. Olympus PT-037 43 pages. Underwater case

5 Deterioration of the O-ring is accelerated by the use conditions

and the storage conditions. Replace the O-ring immediately with

a new one if it shows signs of damage, crack or loss of elasticity.

Q10: What are the important points for Case maintenance?

A10: Pay special attention to the following items.

1 Never use the following chemicals for cleaning, corrosion

protection, defogging, repair or other purposes.

• Never use alcohol, thinner, benzene or similar volatile

organic solvents or chemical detergents to clean the Case.

Pure water or lukewarm water is sufficient for cleaning.

• Do not use anticorrosion agents on the metal parts. The

metal parts are made of aluminum, brass or stainless steel.

Cleaning with pure water is sufficient.

• Do not use commercial defogging agents. Always use the

genuine Olympus defogging silica gel.

• Do not use adhesive for repairs or other purposes. When

repair is required, please contact a service station of our

company or your dealer.

Q11: Please tell me how to use the light cable connector?

A11: Use this connector when connecting the flash through a non-

Olympus cable.

Q12: Please tell me about repairs.

A12: When repair is required, please contact a service station of our

company or your dealer. Do not try to repair, disassemble or modify

the Case yourself. Repair, disassembly or modification by you or

third parties not authorized by Olympus invalidates the guarantee.

Q13: What are the model names of the accessories for the PT-037?

A13: The following accessories are being sold.

1 O-rings for the PT-037 body (POL-037A for front lid, POL-037B

for the rear lid): This is a silicone rubber O-ring packing to be

installed in the PT-037 body to make it waterproof. O-rings for

other Case models cannot be used.

2 Silicone O-ring grease (PSOLG-1): This is a special grease for

silicone O-ring maintenance.

EN 41