Olympus BX3-SSU Manuel d'instructions - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Olympus BX3-SSU. Olympus BX3-SSU 20 pages. Scanning stage with ultrasonic
Également pour Olympus BX3-SSU : Manuel d'instructions (24 pages)

Imprimer la page

7-2 Detailed Assembly Procedures

Installing the scanning stage with ultrasonic

1. Place BX3-SSU over BX63 so that the respective screw numbers (see the Fig. 6) of BX3-SSU and BX63 are overlapped.

2. Tighten the screw hole @ with the clamping screw (attached with BX3-SSU) from the upper side of BX3-SSU. Use Allen

wrench (40x70mm) attached with BX63 for tightening.

3. Tighten the screw holes 2 and 3 with the clamping screw (attached with BX63) from the lower side of the stage fixing

pillar of BX63. Use Allen wrench (40x70mm) attached with BX63 for tightening.

Front side

Clamping screw (attached with BX3-SSU)

}Tighten with Allen wrench (40x70mm).

11 11

Clamping screw (attached with BX3-SSU)

}Tighten with Allen wrench (40x70mm).

Upper side of BX3-SSU

Front side

Lower side of BX3-SSU

BX63

Fig. 6

(Fig. 6)

Allen wrench (AxBmm)