Olympus TRIP 35 Instructions de réparation - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions de réparation pour {nom_de_la_catégorie} Olympus TRIP 35. Olympus TRIP 35 17 pages.
Également pour Olympus TRIP 35 : Manuel d'instructions (13 pages), Manuel d'instructions (13 pages)
Imprimer la page
1. Remove the top of the camera. The top is held on with three screws. One is on the right side, just under the
wrist strap lug. The other two are under the film rewind crank. To get to these two screws, it is necessary to
remove the film rewind crank. Open the back of the camera and put a rod or stick between the fingers of the
film rewind shaft (Although a screw driver will work for this, a wooden popsicle stick is the best tool, as this
can't damage the shaft.). Grasp the film rewind crank and unscrew it. Put the three little screws and the film
rewind parts in the first cup in the ice cube tray. Once the top has been removed, the meter can be seen
directly to the right of the viewfinder.
2. The meter needle is just below the brass plate. With no light shining into the cell, the needle will be fully to
the left, up against the viewfinder.